Dell 5330dn User Manual

1. Power off the printer and unplug all cables from the printer.
2. Find the location of the High Capacity Feeder connector and alignment pins.
3. Place the printer over the High Capacity Feeder aligning the feet on the printer with the alignment pins in the High Capacity Feeder.
4. Load paper in the High Capacity Feeder. For information about loading paper in this tray, see "Loading Print Media".
5. Reconnect the power cord and cables, then power on the printer.

When you print a document on paper loaded in the High Capacity Feeder, you must configure the properties of the printer driver.

To access the properties of the printer driver:
1. Click the Windows Start button.
2. For Windows NT 4.0/2000, select Settings and then Printers.
For Windows XP/2003, select Printers and Faxes.
For Windows Vista, select Control Panel Hardware and Sound Printers.
3. Select the Dell 5330dn Mono Laser Printer.
4. Right-click the printer icon and select Properties.
5. Click the Printer tab and select your Optional Tray from the Optional Tray drop-down list.
6. Click OK and print the document.

To set the tray in the printer properties of the PostScript printer driver.
1. Click the Widows Start button.
Downloaded from ManualsPrinter.com Manuals

Dell 5330dn Specifications

General

Brand	Dell
Model	5330dn
Category	Printer
Language	English