What to do if Dell AC411 power-status light is on but they are not working in bluetooth mode?
If the power-status light is on but your Dell speakers are not working in Bluetooth mode, first ensure that Bluetooth is enabled on your device. Next, check that the Bluetooth LED is blinking blue on the remote control. If the issue persists, try pairing the speaker with your computer again.
What to do if Dell Speakers volume is too low?
If the volume from your Dell speakers is too low, first ensure that there are no obstructions between you and the speakers. Then, increase the volume level on the remote control, your Bluetooth device, the operating system, and the application program you are using. If the problem persists, test the speakers with another audio source, such as a portable music player, to rule out any source-specific issues.
What to do if my Dell AC411 Speakers only have sound from one side?
If sound is only audible from one of your Dell speakers, start by removing any obstructions between the speakers and yourself. Ensure the Aux-in cable is firmly connected to the audio source. In the Windows volume control, slide the audio balance to the midpoint. Additionally, clean and reseat all the cables. As a test, try the speakers with another audio source, for example, a portable music player.
Why is the sound distorted on my Dell Speakers in AUX-in mode?
Distorted sound in AUX-in mode can occur due to several reasons. First, make sure there are no obstructions between you and the speakers. Ensure the Aux-in cable is securely connected to both the woofer and your computer. Try setting the volume control on the remote to fifty percent and also decrease the volume in the application you are using. Cleaning and reseating all cables can also help. Test the speakers with another audio source, like a portable music player, and check that no loose objects are touching the speaker. Also make sure that the RC-in cable is connected firmly to the woofer and the remote control, and the headset is connected firmly to the remote control.
Why is the sound distorted on my Dell AC411 Speakers in Bluetooth mode?
If you are experiencing distorted sound in Bluetooth mode with your Dell speakers, try the following: Ensure there are no obstructions between the speakers and yourself. Set the volume control on the remote to fifty percent. Clean and reseat all the cables. Test the speakers with another audio source, such as a portable music player. Additionally, try reducing the bass using the remote control and ensure that no loose objects are touching the speaker.
What to do if Dell AC411 power-status light is on but they are not working in Aux-in mode?
If the power-status light is on, but your Dell speakers are not working in Aux-in mode, ensure that the Aux-in cable is connected to the Aux-in port and that the Bluetooth LED is turned off. If it still doesn't work, try reseating the Aux-in cable.
How to troubleshoot Dell Speakers if powered on but the power-status light is off?
If your Dell speakers are powered on but the power-status light is off, first check if the wall socket is working by connecting the speakers to a different wall socket. Also, ensure that the power adapter is properly connected to the speakers. If neither of these steps works, the power adapter may have failed and needs to be replaced.
To Next Page
General
