Connecting the printer to a non‑RJ‑11 wall jack
LINE
EXT
1 Connect one end of the telephone cable that came with printer to the port of the printer.
2 Connect the other end of the cable to the RJ‑11 adapter, and then connect the adapter to the wall jack.
3 If you want to connect another device (telephone or answering machine) to the same wall jack, and if the device
has a non‑RJ‑11 connector, then connect it directly to the telephone adapter.
Notes:
• The port of the printer may have an adapter plug for use with the adapter. Do not remove the plug from
the
port of the printer.
• In some countries or regions, the printer may not come with a telephone adapter or an adapter plug.
Faxing 115
To Next Page
Loading...
Need help?
General
