Dell B3465DN User Manual

Use To
Mirror Image
Off
On
Create a mirror image of the original document.
Note: Off is the factory default setting.
Negative Image
Off
On
Create a negative image of the original document.
Note: Off is the factory default setting.
Shadow Detail
‑4 to 4
Adjust the amount of shadow detail visible.
Note: 0 is the factory default setting.
Scan edge to edge
Off
On
Specify if the original document is scanned edge-to‑edge prior to faxing.
Note: Off is the factory default setting.
Sharpness
1–5
Adjust the sharpness of a fax.
Note: 3 is the factory default setting.
Temperature
‑4 to 4
Specify “warm” or “cool” outputs. "Cool” values generate a bluer output than the
default while “warm” values generate a redder output than the default.
Note: 0 is the factory default setting.
Fax Receive Settings
Use To
Enable Fax Receive
On
Off
Allow the printer to receive fax jobs.
Note: On is the factory default setting.
Fax Job Waiting
None
Toner
Toner and Supplies
Remove fax jobs from the print queue when the job requires specific unavailable
resources.
Note: None is the factory default setting.
Rings to Answer
1–25
Specify the number of rings before answering an incoming fax job.
Note: 3 is the factory default setting.
Auto Reduction
On
Off
Scale an incoming fax job so that it fits the size of the paper loaded in the designated
fax source.
Note: On is the factory default setting.
Paper Source
Auto
Tray [x]
Multi‑Purpose Feeder
Specify the paper source for printing incoming fax jobs.
Note: Auto is the factory default setting.
Sides (Duplex)
Off
On
Enable two‑sided (duplex) printing for incoming fax jobs.
Note: Off is the factory default setting.
Understanding the printer menus 177

Dell B3465DN Specifications

General

Brand	Dell
Model	B3465DN
Category	All in One Printer
Language	English