Dell C5517H - OSD Warning Messages

44  Operating the Monitor
OSD Warning Messages
When the monitor does not support a particular resolution mode you will
see the following message:
Dell C5517H
The current input timing is not supported by the monitor display.
Please change your input timing to 1920x1080, 60Hz or any
other monitor listed timing as per the monitor specifications.
This means that the monitor cannot synchronize with the signal that it is
receiving from the computer. See Monitor Specifications for the horizontal
and vertical frequency ranges addressable by this monitor. Recommended
mode is 1920 x 1080.
You will see the following message before the DDC/CI function is disabled.
Dell C5517H
The function of adjusting display setting using PC application will be
No
Yes
disabled.
Do you wish to disable DDC/CI function?
When the monitor enters the Power Save mode, the following message
appears:
Dell C5517H
Entering Power Save Mode.