Dell D10U002 - Removing the 2.5-Inch Drive from the Drive Bracket; Installing the Drive into the Drive Bracket

Installing the WLAN card
1 Insert the WLAN card to the connector.
2 Connect the WLAN cables to the WLAN card.
3 Place the plastic tab to secure the WLAN cables.
4 Tighten the screw to secure the plastic tab to the WLAN card.
5 Install the:
a hard drive assembly
b cover
6 Follow the procedure in After working inside your computer.
M.2 PCIe SSD
Removing the M.2 PCIe SSD
1 Follow the procedure in Before working inside your computer.
2 Remove the:
a cover
b 2.5–inch drive assembly
3 To remove the M.2 PCIe SSD:
a Remove the screw that secures the M.2 PCIe SSD [1].
b Lift and pull out the PCIe SSD from its connector [2].
14
Removing and installing components