EasyManua.ls Logo

Dell D17S003 - Page 63

Dell D17S003
74 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Table 10. System setup optionsSecurity menu (continued)
Security
Absolute® Enable or disable the BIOS module interface of the optional Absolute
Persistence Module service from Absolute® Software.
Default: Enable Absolute
Admin Setup Lockout Enable to prevent users from entering Setup when an Admin Password is set.
Master Password Lockout Disables the master password support. Hard Disk passwords need to be
cleared before changing the setting.
SMM Security Mitigation Enable or disable SMM Security Mitigation
Table 11. System setup optionsPasswords menu
Passwords
Admin Password Enables the user to set, change, or delete the administrator (admin) password.
The admin password enables several security features
System Password Enables the user to set, change, or delete the system password.
Password Configuration
Upper Case Letter Enforces password restriction that the password must contain at least one
upper case letter.
Default: OFF
Lower Case Letter Enforces password restriction that the password must contain at least one
lower case letter.
Default: OFF
Digit Enforces password restriction that the password must contain at least one
digit.
Default: OFF
Special Character Enforces password restriction that the password must contain at least one
special character.
Default: OFF
Minimum Characters Controls the minimum number of characters allowed for password.
Default: 04
Password Changes
Enable Non-Admin Password Changes Enables or disables the user to change the system and hard drive password
without the need for admin password.
Default: ON
Master Password Lockout
Enable Master Password Lockout Enables or disables master password support.
Allow Non-Admin PSID Revert
Enable Allow Non-Admin PSID Revert Enables or disables Physical Security ID (PSID) revert of NVMe storage drives
from the Dell Security Manager prompt.
Default: Disabled
NOTE: When disabled, the PSID revert is protected by the BIOS Admin
password (if set), and the user will be prompted for the password before
the revert is performed
BIOS setup 63

Table of Contents

Related product manuals