25
Operating your monitor
Auto Adjust
The following dialog appears on a black screen as the monitor
self-adjusts to the current input:
Auto Adjust allows the monitor to self-adjust to the incoming
video signal. After using Auto Adjustment, you can further tune
your monitor by using the Pixel Clock (Coarse) and Phase
(Fine) controls under Display.
NOTE: Auto Adjust does not occur if you press the button
while there are no active video input signals or attached cables.
This option is only available when you are using the analog
(VGA) connector.
Use this option to activate automatic setup and adjust menu.
Brightness / Contrast
Dell 20 Monitor
Input Source
Color
Display
Others
Personalize
Menu
Auto Adjust
Press to adjust the screen automatically
Auto Adjustment in Progress...
|
To Next Page
Loading...
