Dell D24M User Manual

Removing the wireless card
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Prerequisites
1 Remove the right-side cover.
2 Follow the procedure from step 1 to step 2 in “Removing the power-supply unit”.
Procedure
1 Locate the wireless-card slot on the system board.
For more information, see “System-board components”.
2 Remove the screw that secures the wireless-card bracket to the wireless card
and the system board.
3 Remove the wireless-card bracket and disconnect the antenna cables from the
wireless card.
103

Dell D24M Specifications

General

Brand	Dell
Model	D24M
Category	Desktop
Language	English