How to fix 'Keyboard Data Line Failure' on a Dell D29M Desktop?
To fix a 'Keyboard Data Line Failure' on your Dell Desktop, for external keyboards, check the cable connection. Run the Keyboard Controller test in Dell Diagnostics.
How to fix 'Memory Address Line Failure' on a Dell D29M Desktop?
To resolve a 'Memory Address Line Failure' on your Dell Desktop, reinstall the memory module or, if necessary, replace it.
What does power rail failure mean for Dell D29M Desktop?
If your Dell Desktop is experiencing a power rail failure, it means the EC ran into a power sequencing failure. If the problem persists, replace the system board.
What does 'Decreasing available memory' mean on my Dell Desktop, and how can I fix it?
If your Dell Desktop shows 'Decreasing available memory', one or more memory modules may be faulty or improperly seated. Reinstall the memory modules or, if necessary, replace them.
What to do if my Dell Desktop displays 'The file being copied is too large for the destination drive'?
If your Dell Desktop says that the file being copied is too large for the destination drive, try copying the file to a different disk or use a larger capacity disk.
What to do if my Dell D29M shows 'Time-of-day clock stopped'?
If your Dell Desktop displays the message 'Time-of-day clock stopped', connect your computer to an electrical outlet to charge the battery.
What to do if my Dell D29M shows 'Time-of-day clock lost power'?
If your Dell Desktop displays the message 'Time-of-day clock lost power', connect your computer to an electrical outlet to charge the battery.
What to do if my Dell Desktop shows 'No boot device available'?
If your Dell Desktop displays 'No boot device available', and you are using a hard drive, make sure that the drive is installed, properly seated, and partitioned as a boot device.
What to do if my Dell D29M says 'Bad command or file name'?
If you receive a 'Bad command or file name' error on your Dell Desktop, ensure that you have spelled the command correctly, have put spaces in the proper place, and have used the correct path name.
What to do if my Dell D29M Desktop says 'Insert bootable media'?
If your Dell Desktop displays the message 'Insert bootable media', the suggested solution is to insert bootable media into your computer.
Essential safety instructions and precautions for working inside the computer to prevent damage and injury.
Measures to prevent damage from static electricity, including using ESD kits and proper handling.
Steps to safely prepare the computer before internal work, including shutdown and power disconnection.
Procedures for safely reassembling the computer after internal service is completed.
Procedures for removing the side cover and front bezel to access internal components.
Guides for installing and removing 2.5-inch drives, 3.5-inch drives, and M.2 SSDs.
Instructions for installing and removing system memory modules from the motherboard.
Procedures for replacing the CPU, heat sink, and fan assembly for thermal management.
Comprehensive guide for removing and installing the computer's main motherboard.
Steps to enter the BIOS setup utility and navigate menus using keyboard keys.
Overview of general options, system information, boot sequence, and security configurations.
Instructions for updating the system BIOS via Windows, USB drive, or the F12 boot menu.
Using built-in diagnostics to perform a complete hardware check and identify issues.
Understanding diagnostic LED blinking patterns to identify specific hardware problems.
Procedures for recovering the operating system using Dell SupportAssist OS Recovery for boot issues.
Information on utilizing Dell's online resources, My Dell app, and knowledge base for support.
Information on how to contact Dell for sales, technical support, or customer service issues.
To Next Page
General
