90 Adding Parts
www.dell.com | support.dell.com
14 Connect your computer and devices to their electrical outlets, and
turn them on.
NOTICE: To connect a network cable, first plug the cable in to the network
wall jack and then plug it in to the computer.
15
Install any drivers required for the drive as described in the
documentation that came with the drive.
Closing the Computer Cover
1 Ensure that all cables are connected, and fold cables out of the way.
2 Ensure that no tools or extra parts are left inside the computer.
3 Pivot the cover down and ensure that the release buttons click into
place.
NOTICE: To connect a network cable, first plug the cable in to the network
wall jack and then plug it in to the computer.
4
Connect your computer and devices to their electrical outlets, and
turn them on.
9p915bk0.book Page 90 Thursday, April 4, 2002 9:26 AM
To Next Page
Loading...
