94 Adding Parts
www.dell.com | support.dell.com
9 Remove the first hard drive from the upper bay and install it in the lower bay:
a Disconnect the power and the hard-drive cables from the back of the first
hard drive.
b Press in the two green rail tabs and pull the first hard drive out of the upper bay.
c Gently slide the first hard drive into the lower bay until you hear a click.
d Reconnect the power and hard-drive cables to the back of the first hard drive.
10 Gently slide the new hard drive into the upper bay until you hear a click.
11 Connect a power cable to the drive.
NOTICE: Match the colored strip on the cable with pin 1 on the drive.
rail tabs (2)
second hard drive
in upper bay
hard drive bay
first hard drive in
lower bay
To Next Page
Loading...
