Dell E1910H - Plug and Play Capability; Flat Panel Specifications; Resolution Specifications; Electrical Specifications

Plug and Play Capability
You can install the monitor in any Plug and Play-
compatible system. The monitor automatically provides the computer with its Extended Display Identification Data
(EDID) using Display Data Channel (DDC) protocols so that the system can configure itself and optimize the monitor settings. Most monitor installations are
automatic. You can select different settings if required.
Flat Panel Specifications
*Dell E1910H Flat Panel monitor color gamut (typical) is based on CIE 1976 (83%) and CIE1931 (72%) test standards.
Resolution Specifications
Electrical Specifications
Model number
Dell E1910H Flat Panel Monitor
Screen type
Active matrix - TFT LCD
Panel Type
TN
Screen dimensions
18.5 inches
(18.5-inch wide viewable image size)
Preset display area:
l Horizontal
l Vertical

409.8 mm (16.1 inches)
230.4 mm (9.07 inches)
Pixel pitch
0.300 mm
Viewing angle:
l Horizontal
l Vertical

160°typical
160°typical
Luminance output
250 CD/m ²(typical)
Contrast ratio
1000 to 1 (typical)
Faceplate coating
Anti-glare
Backlight
2 CCFL edgelight system
Response Time
5ms typical
Color Gamut
83% (typical)*
Model number
Dell E1910H Flat Panel Monitor
Scan range
l Horizontal
l Vertical

30 kHz to 83 kHz (automatic)
56 Hz to 75 Hz (automatic)
Maximum preset resolution
1366 x 768 at 60 Hz
Model number
Dell E1910H Flat Panel Monitor
Video input signals
Analog RGB: 0.7 Volts +/-5%, 75 ohm input
impedance
Synchronization input signals
Separate horizontal and vertical
synchronizations, polarity-free TTL level, SOG
(Composite SYNC on green)
AC input voltage / frequency / current
100 to 240 VAC/50 or 60 Hz + 3 Hz/1.6A (Max.)
Inrush current
120V:30A (Max.)
240V:60A (Max.)