Dell E1920H - Page 46

46 │ Operating your monitor
Icon DescriptionMenu and
Submenus
Auto Adjust Use this option to activate automatic setup and adjust menu.
The following dialog appears on a black screen as the monitor
self-adjusts to the current input:
Auto Adjust allows the monitor to self-adjust to the incoming
video signal. After using Auto Adjustment, you can further tune
your monitor by using the Pixel Clock (Coarse) and Phase
(Fine) controls under Display.
NOTE: Auto Adjust does not occur if you press the button
while there are no active video input signals or attached cables.
This option is only available when you are using the analog
(VGA) connector.
Auto Adjustment in Progress...
EXX20H
E2X20HS
Dell XX Monitor
Brightness / Contrast
Auto Adjust
Input Source
Color
Display
Menu
Personalize
Others
Press to adjust the screen automatically
Dell 2X Monitor
Brightness / Contrast
Auto Adjust
Input Source
Color
Display
Menu
Audio
Personalize
Others
Press to adjust the screen automatically