32 │ Operating the Monitor
OSD Messages
When the monitor does not support a particular resolution mode you will see the
following message:
Dell E2219HN
The current input timing is not supported by the monitor display. Please
change your input timing to 1920 x 1080, 60Hz or any other monitor
listed timing as per the monitor specifications.
This means that the monitor cannot synchronize with the signal that it is receiving from
the computer. See Monitor Specifications for the horizontal and vertical frequency
ranges addressable by this monitor. Recommended mode is 1920 x 1080.
You will see the following message before the DDC/CI function is disabled.
Dell E2219HN
The function of adjusting display setting using PC application will
be disabled. Do you wish to disable DDC/CI function?
NO
YES
When the monitor enters the Power Save mode, the following message appears:
Dell E2219HN
Entering Power Save Mode.
Activate the computer and wake up the monitor to gain access to the OSD.
If you press any button other than the power button, the following messages will appear
depending on the selected input
To Next Page
Loading...
