Operating the Monitor │ 33
Dell E2219HN
There is no signal coming from your computer.
Press any key on the keyboard or move the mouse to wake it up.
If there is no display, press the monitor button now to select
the correct input source on the On-Screen-Display menu.
If VGA or HDMI cable is not connected, a floating dialog box as shown below appears.
The monitor will enter Power Save Mode after 4 minutes if left at this state.
Dell E2219HN
No VGA Cable
www.dell.com/support/monitors
The display will go into Power Save Mode in 4 minutes.
Dell E2219HN
No HDMI Cable
www.dell.com/support/monitors
The display will go into Power Save Mode in 4 minutes.
See Solving Problems for more information.
To Next Page
Loading...
