Dell EMC AX4-5 - Page 29

Cabling Your Cluster Hardware 29
d Connect a cable from Fibre Channel switch 0 (sw0) to SP-B Fibre port
3(Fourth fibre port).
e Connect a cable from Fibre Channel switch 1 (sw1) to SP-A Fibre port
2(Third fibre port).
f Connect a cable from Fibre Channel switch 1 (sw1) to SP-A Fibre port
3(Fourth fibre port).
g Connect a cable from Fibre Channel switch 1 (sw1) to SP-B Fibre port
0(first fibre port).
h Connect a cable from Fibre Channel switch 1 (sw1) to SP-B Fibre port
1(Second fibre port).
Figure 2-10. Cabling a SAN-Attached Cluster to an AX4-5FX Storage System
sw0
sw1
cluster node 2
cluster node 1
AX4-5FX storage system
0
1
0
1
HBA ports (2)
HBA ports (2)
SP-A
SP-B