EasyManua.ls Logo

Dell EMC S4112-ON Series - Specifications; Chassis physical design

Dell EMC S4112-ON Series
26 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Specications
This section lists the S4112-ON Series (S4112F-ON and S4112T-ON) switch specications.
CAUTION: Operate the product at an ambient temperature not higher than 45°C
(113°F).
CAUTION: Lithium Battery Caution: There is a danger of explosion if the battery is
incorrectly replaced. Replace only with same or equivalent type of battery. Dispose
of the batteries according to the manufacturer's instructions.
NOTE: For RoHS information, see Restricted Material Compliance.
Chassis physical design
Table 1. Chassis physical design
Parameter Specications
Height 1.75 inches (41.25 mm)
Width 8.2 inches (209 mm)
Depth 17.7 inches (450 mm)
Chassis weight with factory-installed
components
S4112F-ON: 8.30 lbs, 3.76 kg (2 PSUs and 3
fans)
S4112T-ON: 8.45 lbs, 3.81 kg (2 PSUs and 3
fans)
Rack clearance required
Front: 5 inches (12.7 cm)
Back: 5 inches (12.7 cm)
4
Specications 23

Related product manuals