System component description
33
Overview
Network management and service laptop Ethernet (RJ-45) port LEDs — Figure 19 shows
the SP network management and service laptop Ethernet (RJ-45) port LEDs—a green LED to
the left of the connector and a bi-color (green/amber) LED to the right of the
connector—that indicate the link/activity and speed of the Ethernet ports, respectively.
Figure 19 Network management and service laptop Ethernet (RJ-45) port LEDs
Table 12 describes the link/activity and connection speed associated with the SP network
management and service laptop Ethernet (RJ-45) port LEDs.
Serial RS-232/EIA 232 (micro DB-9) socket connector for service laptop
The back of the VNXe3100 platform SP includes a standard serial Electronics Industries
Association (EIA) RS-232 interface (micro DB-9) connector (labeled with a symbol
depicting a wrench on the upper left) to connect to a PC or service laptop computer. This
serial connector (port) allows you to access the SP locally by connecting a terminal—either
a PC running terminal-emulation software or an ASCII terminal—to the port.
Notice the orientation of the pins shown in Figure 20.
Figure 20 Serial RS-232/EIA 232 (micro DB-9) connector (socket) for service laptop
1
2
VNX-000096
Table 12 Network management and service laptop Ethernet (RJ-45) port LEDs
LED Color State Description
Left, link
(location 1)
Green On Network/link connection
Green Blinking Transmit/receive activity
— Off No network/link connection
Right, link
speed
(location 2)
Green On 100-Mb/s connection
Amber On 1000-Mb/s (or 1-Gb/s) connection
— Off 10-Mb/s connection (if left LED is on or blinking)
Pin 1
5
6 9
VNX-000079
To Next Page
Loading...
