System component description
51
Overview
LCC enclosure ID (enclosure address) and bus ID
On the rear of the LCC (A and B), an LCC enclosure ID indicator is provided. This ID
indicator is a seven-segment LED display for displaying decimal numbers. The LCC
enclosure ID appears on both LCCs (A and B) which is the same ID number. The enclosure
ID is set at installation (Figure 36).
Each LCC includes a bus (loop) identification indicator. This indicator includes two
seven-segment LED displays for displaying decimal numbers. The SP initializes the bus ID
when the operating system is loaded (Figure 36).
Figure 36 Example of LCC B enclosure ID and bus ID
Table 26 describes the bus (loop) status LEDs.
6 Gb
SAS
X4
#
X4
Bus (loop) ID
LCC enclosure ID
VNX-000277
Table 26 LCC bus (loop) status LEDs
Led Color State Description
Power on Green On Power on
—OffPower off
Power fault Amber On Fault detected
— Off No fault or power off
To Next Page
Loading...
