EasyManua.ls Logo

Dell EMC VxFlex Ready Node R740xd - Log in to the VxFlex OS GUI

Dell EMC VxFlex Ready Node R740xd
92 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
R840 server installation guidelines
Minimum and maximum stack up configurations are provided in this topic.
Throughout this document, it is assumed that a 40 U rack is being used. If you plan to use a custom rack, or only part of
a rack, it is highly recommended that a complete analysis is performed in order to ensure that there is enough power
supplied to the nodes. In addition, it is essential that a custom rack has sufficient air flow and heat distribution among
nodes. Therefore, for custom rack configurations, perform an air flow analysis and ensure that there is enough spacing
between nodes.
Ensure that there is at least one redundant power zone available for power connections.
To ensure proper performance and avoid throttling, the R840 server requires the appropriate inlet temperature. Review
this requirement and maintain correct inlet temperature. For more information, see environmental specifications in the
Hardware Replacement and Services Guide
.
When systems are installed into an empty rack, always begin component installation at
the bottom of the cabinet and work upward. Install components at the lowest available
space for that component type.
If you are installing the minimum configuration, the stack up will be as follows:
Table 20 Stack up for a minimum configuration
Component Function Description Quantity Cabinet U Space
Data Server R840 Server 3 2 - 7
Management Server Management Server 1 20
Management Switch Customer provided 1 GbE
switch
1 21
Data Switch Customer provided 10 GbE
switch
2 23 - 24
If you are installing the maximum configuration, the stack up will be as follows:
Table 21 Stack up for a maximum configuration
Component Function Description Quantity Cabinet U Space
Data Server R840 Server 13 - 15 3 - 19 and 25 - 39
Management Server Management Server 1 20
Management Switch Customer provided 1 GbE switch 1 21
Data Switch Customer provided 10 GbE switch 2 23 - 24
The following illustration represents the maximum R840 configuration.
R840 Equipment Installation
82 Dell EMC VxFlex Ready Node Server Installation Guide

Table of Contents

Other manuals for Dell EMC VxFlex Ready Node R740xd

Related product manuals