PS6000 Hardware Maintenance Basic Array Information
1–2
Figure 1-2: PS6000 Back Panel
Interpreting Operations Panel LEDs
The PS6000 operations panel monitors array hardware components. The panel is
not redundant, but an array can continue to operate if it fails. See your array
support provider for information about servicing the operations panel.
Note: The serial number for your array is on a label on the operations panel.
Table 1-1: Back Panel Detail Description
Part Description
Power supply and cooling modules. From left to right, they are numbered 1 and
0.
Control modules. From left to right, they are numbered 1 and 0.
Operation panel LED. Includes LEDs that show the status of the array (error
and warning conditions), power status, and location.
Power switches on the power supply and cooling modules. Turns power on and
off to the array.
Serial number label.
To Next Page
Loading...
