PS6000 Hardware Maintenance Basic Array Information
1–3
Figure 1-3 shows the operations panel LEDs, which can alert you to errors and
conditions that require your attention. Table 1-2 describes the LEDs. Report any
serious problems to your array support provider.
For information about other array LEDs, see Interpreting Disk LEDs on page 2-2,
Interpreting Control Module LEDs on page 3-2, and Interpreting the LEDs on
page 4-1.
Figure 1-3: Operations Panel
Table 1-2: Operations Panel Descriptions
Item Status Description
Power LED
Off No power.
Green Power.
Array locator
LED
Off No power or normal condition.
Flashing orange Administrator enabled the array locator function.
Identifier
switch
N/A Not used.
To Next Page
Loading...
