Index-1
Index
A
array
back panel 1-2
batteries 3-1
control module restriction 3-11
control modules 3-1
cooling 4-1
disk types 2-3
environmental requirements A-1
failure indications 1-3
fans 4-1
firmware 3-4
front panel 1-1
LEDs 1-3, 2-2, 3-2, 4-1
maximum network availability 3-7
maximum network bandwidth 3-7
minimum network configuration
3-6
network connection guidelines 3-5
power supplies 4-1
protecting from discharge 1-5
serial number 1-2, 1-5
shutdown procedure 1-5
specifications A-1
B
batteries
charging 3-13
servicing 3-1
C
cable strain relief, using 4-4
cables (network), connecting 3-6
cables (power), connecting 4-4
control modules
batteries 3-1
charging cache battery 3-13
checking proper installation 3-13
disk support 3-1
failover behavior 3-3
failure indications 3-3
firmware identification 3-4
firmware requirements 3-4, 3-12,
3-14
handling requirements 3-8
installing in array 3-11
LEDs 3-2
locating 3-3
micro SD card, moving 3-11
micro SD card, replacing 3-4, 3-5,
3-14
removing from array 3-8
restriction on mixing 3-1, 3-11
supported disk type 3-11
synchronizing 3-8, 3-9
types 3-1, 3-11
verifying operational status 3-13
cooling
indications of failure 4-1
initialization 4-5
installing module in array 4-4
LEDs 4-1
locating modules 4-2
removing module from array 4-2
verifying operational status 4-5
D
disks
control module support 2-1
failure behavior 2-4
failure indications 2-4
handling requirements 2-4
identifying type 2-3
installing in array 2-7
LEDs 2-2
locating 2-4
protecting 2-4
To Next Page
Loading...
