Dell EqualLogic PS6100 series - Initial NAS Cluster Valid Configurations

March 2013 Dell EqualLogic Configuration Guide v14.1 11-109
Attribute
Single NAS appliance cluster
(Two NAS controllers)
Dual NAS appliance cluster
(Four NAS controllers)
Maximum replication
partners
16 16
Number of NAS
controllers in replication
source and destination
clusters
Each NAS cluster in the
replication partnership must
contain the same number of
NAS controllers.
Each NAS cluster in the
replication partnership must
contain the same number of
NAS controllers.
The limits shown for files and directories, containers, NFS exports, CIFS shares, and container snap-
shots are the maximum supported limits. The group will not prevent you from exceeding a limit and
will not warn you when you reach or exceed a limit.
11.2 Initial NAS cluster valid configurations
The table below describes the configurations allowed during initial configuration.
Table 47 Initial valid configurations
Cluster
Controller Pair 1
Controller Pair 2
Two-controller
FS7500
NA
Two-controller
FS7600
NA
Two-controller FS7610 NA
Four-controller FS7500 FS7500
Four-controller
FS7500
FS7600
Four-controller
FS7600
FS7600
Four-controller
FS7610
FS7610