March 2013 Dell EqualLogic Configuration Guide v14.1 13-122
Figure 41 Connection Paths for FS7500 iSCSI SAN, IPMI and Controller Interconnect
13.2 FS7600/7610 connection paths
The Dell EqualLogic NAS appliances require the following networks:
• Client network: Used for client access to the NFS exports and CIFS shares hosted by the NAS
cluster.
• SAN/internal network: Used for internal communication between the controllers and
communication between the controllers and the EqualLogic PS Series SAN. The SAN and Internal
networks use the same set of switches.
To Next Page
Loading...
