Dell EqualLogic PS6100 series User Manual

March 2013 Dell EqualLogic Configuration Guide v14.1 14-136
For more information on the DCB requirements and configuration guidelines, see the following white
paper:
Data Center Bridging: Standards, Behavioral Requirements, and Configuration Guidelines with
Dell EqualLogic iSCSI SANs
For more information on the DCB requirements for EqualLogic, to ensure that DCB is properly enabled
and/or disabled across all devices, and to assist with identifying and resolving basic DCB configuration
issues in the EqualLogic SAN, see the following white paper:
EqualLogic DCB Configuration Best
Practices
For a comprehensive understanding of integrating an M1000e Blade Chassis in a Full End-to-End Data
Center Bridging environment, see the following white paper:
M1000e Blade Enclosure and EqualLogic
Arrays SAN Design using Force10 Switches

Dell EqualLogic PS6100 series Specifications

General

RAID Support	RAID 5, RAID 6, RAID 10, RAID 50
Hot-Swappable Components	Drives, power supplies, controllers
Drive Bays	24
Drive Types	SAS, SSD
Controllers	Dual controllers
Network Interfaces	4 x 1GbE per controller
Management	Group Manager
Power Supply	Dual redundant hot-swappable power supplies
Maximum Raw Capacity	Up to 72TB
Number of Drives	24
Operating Temperature	10° to 35°C (50° to 95°F)
Form Factor	3U