Installing the solid-state drive
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
NOTE: This computer supports only one M.2 slot for either an M.2 2230 solid-state drive or an M.2 2280 solid-state drive.
If you want to replace an M.2 2230 solid-state drive with an M.2 2280 solid-state drive, see Procedure to move the solid-state
drive holder and then follow the steps for installing an M.2 2280 solid-state drive.
If you want to replace your M.2 2280 solid-state drive with an M.2 2230 solid-state drive, see Procedure to move the solid-state
drive holder and then follow the steps for installing the M.2 2230 solid-state drive.
The following image indicates the location of the solid-state drive (M.2 2230 or M.2 2280) and provides a visual representation
of the installation procedure.
Removing and installing components 19
To Next Page
Loading...
