66 Setting Up a Home and Office Network
www.dell.com | support.dell.com
Connecting to a Network Adapter
Before you connect your computer to a network, the computer must have a
network adapter installed and a network cable connected to it.
To connect a network cable:
1 Connect the network cable to the network adapter connector on your
computer.
NOTE: Insert the cable
until it clicks into place,
and then gently pull it to
ensure that it is secure.
2 Connect the other end of the network cable to a network connection
device, such as a network wall jack.
NOTE: Do not use a
network cable with a
telephone wall jack.
Network Setup Wizard
The Microsoft
®
Windows
®
XP operating system provides a Network Setup
Wizard to guide you through the process of sharing files, printers, or an
Internet connection between computers in a home or small office.
1 Click the Start button, point to All Programs→ Accessories→
Communications, and then click Network Setup Wizard.
2 On the welcome screen, click Next.
3 Click Checklist for creating a network.
To Next Page
Loading...
