Replacing the keyboard
daughter-board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Procedure
1 Adhere the keyboard daughter-board to the palmrest and keyboard assembly.
2 Slide the keyboard cables and keyboard-backlight cables into the connectors on
the keyboard daughter-board and press down the latches to secure the cables.
Post-requisites
1 Replace the battery.
2 Replace the base cover.
36
To Next Page
Loading...
