Removing the power and
volume-buttons board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Prerequisites
1 Remove the base cover.
2 Remove the battery.
3 Follow the procedure from step 1 to step 3 in “Removing the hard drive”.
Procedure
1 Peel off the tapes that secure the power and volume-buttons board cable to the
palmrest and keyboard assembly.
2 Disconnect the power and volume-buttons board cable from the I/O board.
37
To Next Page
Loading...
