Replacing the display cable
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Procedure
1 Route the display cable through the routing guides on the display bezel.
2 Adhere the touch-screen board to the display bezel.
3 Connect the touch-screen board cables to the touch-screen board.
4 Adhere the tapes to the touch-screen board cable and the touch-screen board.
5 Slide the display cable into the connector on the display panel and press down
the latch to secure the cable.
Post-requisites
1 Replace the Windows-button board.
2 Follow the procedure from step 1 to step 2 in “Replacing the camera”.
3 Follow the procedure from step 4 to step 5 in “Replacing the display panel”.
4 Replace the display assembly.
5 Replace the battery.
6 Replace the base cover.
98
To Next Page
Loading...
