12 Slide the touch-pad cable and the power-button board cable into their
connectors on the system board and press down the latches to secure
the cables.
Post-requisites
1 Replace the I/O board.
2 Replace the heat-sink assembly.
3 Replace the computer base.
4 Replace the keyboard.
5 Replace the wireless card.
6 Follow the procedure from step 5 to step 7 in “Replacing the hard drive”.
7 Replace the memory modules.
8 Replace the optical drive.
9 Replace the base cover.
10 Replace the battery.
62
To Next Page
Loading...
