14 Align the screw holes on the display hinges with the screw holes on the palm-
rest assembly.
NOTE: These instructions are applicable only for laptops with a non-
touch screen display.
15 Replace the screw (2.5x8) that secure the display hinges to the palm-rest
assembly.
Post-requisites
1 Replace the fan.
2 Replace the heat sink.
3 Replace the memory modules.
4 Replace the wireless card.
5 Follow the procedure from step 2 to step 8 in “Replacing the base cover”.
6 Replace the keyboard.
7 Follow the procedure from step 4 to step 5 in “Replacing the optical drive”.
8 Replace the battery.
79