Removing the battery
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Procedure
Procedure
1. Slide the battery-release latch to the unlocked position.
You hear a click sound when the battery is unlocked.
2. Using your fingertips, lift the battery at an angle and remove it from the battery bay.
3. Turn the computer over, open the display, and press the power button for five seconds to ground the system board.
3
12 Removing the battery
To Next Page
Loading...
