Removing the status-light lens
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Prerequisites
• Procedure
Prerequisites
1. Remove the battery.
2. Follow the procedure from step 1 to step 3 in “Removing the optical drive”.
3. Remove the keyboard.
4. Follow the procedure from step 1 to step 7 in “Removing the base cover”.
Procedure
Remove the status-light lens from the guide on the palm-rest assembly.
31
Removing the status-light lens 49
To Next Page
Loading...
