Replacing the camera
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Procedure
• Post-requisites
Procedure
1. Using the alignment post, adhere the camera on the display back-cover and antenna assembly.
2. Connect the camera cable to the camera.
Post-requisites
1. Replace the display bezel.
2. Replace the display assembly.
3. Replace the wireless card.
4. Follow the procedure from step 2 to step 8 in “Replacing the base cover”.
5. Replace the keyboard.
6. Follow the procedure from step 4 to step 5 in “Replacing the optical drive”.
7. Replace the battery.
46
72 Replacing the camera
To Next Page
Loading...
