Removing the display back-cover and
antenna assembly
NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your computer. After working inside your computer, follow the instructions in After
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Topics:
• Prerequisites
• Procedure
Prerequisites
1. Remove the battery.
2. Follow the procedure from step 1 to step 3 in Removing the optical drive
3. Remove the keyboard.
4. Follow the procedure from step 1 to step 7 in “Removing the base cover”.
5. Remove the wireless card.
6. Remove the display assembly.
7. Remove the display bezel.
8. Remove the display panel.
9. Remove the display hinges.
10. Remove the camera.
Procedure
NOTE: These instructions are applicable only for laptops with a non-touch screen display.
After performing the steps mentioned in the prerequisites, we are left with the display back-cover and antenna assembly.
49
76 Removing the display back-cover and antenna assembly
To Next Page
Loading...
