Table 14. System setup options—Main menu (continued)
Main
CPU Type Displays the processor type.
CPU Speed Displays the processor speed.
CPU ID Displays the processor identification code.
CPU Cache
L1 Cache Displays the processor L1 cache size.
L2 Cache Displays the processor L2 cache size.
First HDD Displays the type of hard drive installed.
SATA ODD Displays the type of optical drive installed.
AC Adapter Type Displays the type of AC adapter.
System Memory Displays the size of memory installed.
Memory Speed Displays the speed of memory.
Table 15. System setup options—Advanced menu
Advanced
Virtualization Allows you to enable or disable the Intel Virtualization
technology.
Default: Enabled
USB Emulation Allows you to enable or disable the USB emulation feature.
This feature defines how the BIOS, in the absence of a
USB-aware operating system, handles USB devices. USB
emulation is always enabled during POST.
NOTE: You cannot boot any type of USB device (floppy,
hard drive, or memory key) when this option is off.
Default: Enabled
USB Wake Support Allows you to enable USB devices to wake the computer
from standby or to disable the USB wake support feature.
NOTE: If USB PowerShare is enabled, a device
connected to the USB PowerShare connector may not
wake the computer.
Default: Disabled
SATA Operation Allows you to configure the operating mode of the integrated
SATA hard drive controller.
Default: AHCI
Adapter Warnings Allows you to choose if the computer should display warning
messages when you use AC adapters that are not supported
by your computer.
Default: Enabled
Function Key Behavior Allows you to set function key or multimedia key as the
default function key behavior.
Default: Multimedia key
Battery Health Displays the battery health.
Intel (R) Software Guard Extensions
Intel SGX Enable Enable or disable Intel Software Guard Extensions.
System setup 91
To Next Page
Loading...
