1 Rear audio connector on the computer 6 Center/LFE surround out on the speaker
2 Center/LFE surround out on the computer 7 Front audio connector on the speaker
3 Side audio connector on the computer 8 Rear audio connector on the speaker
4 Front audio connector on the computer 9 Side audio connector on the speaker
5 7.1 channel audio cable
To set up your speakers:
Windows 7 and Windows Vista
1. Click Start
→ Control Panel→ Hardware and Sound→ Sound.
2. Select Speakers and then click Configure.
The Speaker Setup window appears.
3. Select a speaker configuration under Audio channels: and then click Test.
You should hear a tone from every speaker.
4. Click Next.
5. Follow the instructions on the screen.
If you experience problems with your computer sound, see the knowledge base article 266424 at support.dell.com.
Related Information
Audio Connectors
Setting Up 5.1 Audio
Back to Contents Page
To Next Page
Loading...
