Back to Contents Page
Digital Visual Interface Connector Cables
Use the appropriate cable based on the connectors available on your computer and display. See the following table to identify the connectors on your
computer and display.
Connector on the computer Connector on the display Cable needed
DVI-D
DVI-D DVI-D Cable
DVI-I DVI-D Cable
DVI-A DVI-D to VGA convertor
VGA DVI-D to VGA converter
HDMI DVI-D to HDMI cable
DVI-A
DVI-D VGA to DVI-D converter
DVI-I DVI-A cable
DVI-A DVI-A cable
VGA DVI to VGA cable
DVI-I
DVI-D DVI-D cable
DVI-I DVI-I cable
DVI-A DVI-A cable
VGA DVI to VGA cable
HDMI DVI-D to HDMI cable
NOTE: When connecting to a single display, connect the display to ONLY ONE of the connectors on your computer.
1. Turn off your computer.
2. Turn off the display and disconnect it from the power supply.
3. Connect one end of the display cable to the DVI port on your computer.
4. Connect the other end of the cable to the same connector on your display.
5. If necessary, connect one end of the power cable to the display's power connector.
6. Connect the other end of the power cable to the display's three-prong power strip or wall outlet.
7. Turn on your computer, and then turn on your display.
Related Information
Digital Visual Interface
Back to Contents Page
To Next Page
Loading...
