Procedure
1 Align the notch on the memory module with the tab on the memory-
module slot.
2 Insert the memory module into the memory-module slot, and press the
memory module down until it clicks into place.
NOTE: If you do not hear the click, remove the memory module
and reinstall it.
1 tab 2 notch
3 memory module 4 securing clips (2)
5 memory-module slot
Post-requisites
1 Follow the instructions from step 4 to step 13 in “Replacing the System
Board”.
2 Replace the wireless card.
3 Follow the instructions from step 3 to step 5 in “Replacing the Back
Cover”.
50