Replacing the Antenna
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer. After working inside your
computer, follow the instructions in After Working Inside Your
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1 Adhere the antenna modules to the display bezel and secure the antenna
modules with the Aluminium foil tapes.
2 Route the antenna cables through the routing guides on the display
bezel.
3 Adhere the Aluminium foil tapes to the antenna cables and camera and
control-buttons board cable.
4 Connect the antenna cables to the wireless card. See “Replacing the
Wireless Card”.
Post-requisites
Follow the instructions from step 3 to step 5 in “Replacing the Back Cover”.
62
To Next Page
Loading...
