114 Removing and Installing Parts
1
Follow the procedures in "Before You Begin" on page 101.
2
Press the securing clip at each end of the memory module connector.
3
Align the notch on the bottom of the module with the crossbar in the
connector.
1 memory connector farthest
from processor (DIMM_2)
2 securing clips (2) 3 connector
1 cutouts (2) 2 memory module
3 notch 4 crossbar
2
3
1
3
2
1
4
book.book Page 114 Wednesday, April 16, 2008 3:33 PM
To Next Page
Loading...
