Removing and Installing Parts 125
Recommended Drive Cable Connections
• Connect serial ATA hard drives to connectors labeled "SATA0" or "SATA1"
on the system board.
• Connect serial ATA CD or DVD drives to connectors labeled "SATA2" or
"SATA3" on the system board.
Connecting Drive Cables
When you install a drive, you connect two cables—a DC power cable and a
data cable—to the back of the drive.
1 power supply 2 hard drive 3 front I/O panel
4 floppy drive or Media Card
Reader (optional)
5 CD or DVD drive 6 chassis fan
1 power cable 2 power input connector
1
2
6
5
4
3
1
2
Power Connector
book.book Page 125 Wednesday, April 16, 2008 3:33 PM
To Next Page
Loading...
