128 Removing and Installing Parts
8
Replace the support bracket (see "Replacing the Support Bracket" on
page 164).
9
Replace the computer cover (see "Replacing the Computer Cover" on
page 165).
10
Connect computer and other devices to an electrical outlet.
Installing a Hard Drive
1
Follow the procedures in "Before You Begin" on page 101.
2
Remove the computer cover (see "Removing the Computer Cover" on
page 103).
3
Remove the support bracket (see "Removing the Support Bracket" on
page 104).
4
Check the documentation for the drive to verify that it is configured for
your computer.
5
Attach the shoulder screws to the hard drive.
6
Connect the power and data cables to the drive.
7
Connect the data cable to the system board.
8
Slide the hard drive into the hard drive bay.
1 hard drive 2 shoulder screws (4)
2
1
book.book Page 128 Wednesday, April 16, 2008 3:33 PM
To Next Page
Loading...
