Removing and Installing Parts 159
3
Align and press the heat sink and fan assembly till both snap in place.
4
Replace the heat sink assembly (see step 9 of "Installing the Processor" on
page 150).
5
Replace the cables that were removed from the routing clips on top of the
processor fan assembly.
6
Connect the processor fan cable to the system board (see "System Board
Components" on page 107).
NOTICE: Ensure that the fan is correctly seated and secure.
7
Replace the computer cover (see "Replacing the Computer Cover" on
page 165).
8
Connect your computer and devices to an electrical outlet, and turn
them on.
1 fan 2 fan cover 3 heat sink
1
2
3
book.book Page 159 Wednesday, April 16, 2008 3:33 PM
To Next Page
Loading...
