Computer Cover 19
Replacing the Computer Cover
1
Connect all the cables and fold the cables out of the way.
2
Ensure that no tools or extra parts are left inside the computer.
3
Align the tabs at the bottom of the computer cover with the slots located
along the edge of the chassis.
4
Press the computer cover down and slide it towards the front of the computer.
5
Replace the screws that secure the computer cover to the chassis.
6
Place the computer in an upright position.
7
Follow the instructions in "After Working Inside Your Computer" on
page 11.
1 screws (2) 2 computer cover
book.book Page 19 Tuesday, April 17, 2012 11:37 AM
To Next Page
Loading...
