Power Supply 83
Replacing the Power Supply
Procedure
1
Slide the power supply towards the back of the chassis.
2
Align the screw holes on the power supply with the screw holes on the
chassis.
3
Replace the screws that secure the power supply to the chassis.
4
Connect the DC power cables to the system board and drives.
See "System Board Components" on page 14.
Postrequisites
1
Replace the computer cover. See "Replacing the Computer Cover" on
page 19.
2
Follow the instructions in "After Working Inside Your Computer" on
page 11.
book.book Page 83 Tuesday, April 17, 2012 11:37 AM
To Next Page
Loading...
