Optical Drive 55
6
If you are replacing the primary optical-drive, connect the power and data
cables to the primary optical-drive.
7
If you are replacing the secondary optical-drive:
a
Connect the power cable to the primary and secondary optical-drives.
b
Connect the data cable to the secondary optical-drive.
Postrequisites
1
Replace the computer cover. See "Replacing the Computer Cover" on
page 19.
2
Replace the front bezel. See "Replacing the Front Bezel" on page 27.
3
Follow the instructions in "After Working Inside Your Computer" on
page 11.
book.book Page 55 Tuesday, April 17, 2012 11:37 AM
To Next Page
Loading...
